FOR MANY FIELDS
KICKNEN B-7V
FEATURES
Keeping rodents away from applied areas with long-term sustainable repellent effect using micro-capsuled “pepper’s spicy ingredient”. Also its high quality non-hardening typed putty, featuring flame retardation and quite superior for workability in terms of adhesion and sealing performance.
USES
- Cable/pipe penetrations in buildings, factories, warehouses, kitchens, etc.
- Entrance of mice/rodents invasion.
- Electric equipment, etc.
SPECIFICATION
| ITEM | KICKNEN B-7V | Method |
|---|---|---|
| Appearance | Light Gray | Observation |
| Hardness | 50 | JIS A 5752 Load:100g▪5sec |
| Specific Gravity | 2.00 | Convert weight in water |
| Heat Resistance | NP | Originally measured (70°C×72hr) |
| Cold Resistance | NP | Originally measured (-20°C×72hr) |
| Flame Resistance | UL-94 V-0 level | Fire test of the plastic material (Base on UL-94) |
| Size(mm) | 80×40×160 | – |
| Weight | 1kg/pack | – |
| Packing | 10packs/case | – |
*The above inspection data is measured originally, so it does not guarantee as a standardized data.
*NP = Not Particular
POPPOSEAL
FEATURES
Pasty bird repellent made of tacky synthetic resin material keeps any birds from landing on the applied places without harming them.
USES
- Iron tower, power pole, bridge, etc.
- Construction roof and arm railing.
SPECIFICATION
| ITEM | POPPOSEAL | Method |
|---|---|---|
| Appearance | Colorless translucent | Observation |
| Hardness | 250 | JIS A 2220 Load:150g▪5sec |
| Specific Gravity | 2.00 | Convert weight in water |
| Heat Resistance | NP | Originally measured (70°C×24hr) |
| Weight▪Packing | Cartridge Type 320ml/pack▪30packs/case | – |
| Tube Type 250g/pack▪30packs/case | – | |
| Tube Type 400g/pack▪25packs/case | – |
*The above inspection data is measured originally, so it does not guarantee as a standardized data.
*NP = Not Particular
PLASEALS-1
FEATURES
- Most suitable for resin piping.
- Excelled heat resistance.
- Closely adhered and elastic even after cured.
- Simple and handy workability.
- Water-tightness (IP-44 class)
- High-level flame resistance (UL-94 V-0 class)
USES
- Sealing of penetration around resin piping
(hot water plumbing). - Sealing od cable penetration for solar power system, etc.
SPECIFICATION
| ITEM | PLASEAL S-1 | Method |
|---|---|---|
| Appearance | Mixed compaund: Gray (Base:Blue Hardener:Orange) | Observation |
| Specific Gravity | Mixed compaund:1.7 (Base:1.7 Hardener:1.7) | Convert weight in water |
| Mixing Ratio | 1:1 | Ratio by weight |
| Usable Time | 8hr | Originally measured(20°C/100g) |
| Curing time | 48hr | Originally measured(20°C/100g) |
| Fardness(HAD) | 54 | JIS K7215(20°C/48hr) |
| Flame Resistance | UL-94 V-0 level | Fire test of the plastic material (Base on UL-94) |
| Size(mm) | 20×20×110 | – |
| Weight | 150g / set | – |
| Packing[Size(mm)] | 2sets / pack (10packs / case) [240×145×150] | – |
*The above inspection data is measured originally, so it does not guarantee as a standardized data.
PLASEAL A-310UV/A-311UV（UV-curing resin）
SOCOPITATTO（Putty-typed temporarily fixing material）
PLASEAL B-PA（Termite repellent putty）
